Gateway HD2401 - Manual (Page 6)

Using Your Gateway Flat-Panel Monitor
2
Connecting the monitor
To set up the monitor, first attach the base, then make your cable connections.
Attaching the base
To attach the base:
1 Place the monitor base on a table top.
2 Slide the monitor neck down onto the base until it clicks into place. You may need to press
the button on the base to let your monitor slide on smoothly.
Connecting video inputs
To connect video sources to your monitor:
1 Position your computer and the monitor so you can reach the back of each.
2 Make sure that you computer is turned off.