Grizzly H8150 - Manual (Page 14)

-12-
H8148/H8149/H8150 Heavy Duty Bench Ginders
Inventory
After all the parts have been removed from the
box, you should have the following items:
Box Contents: (Figure 3 & 4) Qty
A. Heavy-Duty Bench Grinder Unit
(Not Shown) ............................................... 1
B. Left Lens Hanger ........................................ 1
Right Lens Hanger (Not Shown) ................ 1
C. Left Spark Arrestor ..................................... 1
Right Spark Arrestor (Not Shown) ............. 1
D. Lens ............................................................ 2
E. Nut Plates ................................................... 2
F. Left Tool Rest ............................................ 1
Right Tool Rest (Not Shown) ..................... 1
G. Hardware and Tools (Not Shown): Qty
—Flange Screws M6-1 x 12mm
(Eye Shield) ............................................ 2
—Lock Washers 7mm (Eye Shield) ........... 2
— Flat Washers 7mm (Eye Shield) ............. 2
— Female Knobs M6-1.25 (Eye Shield) ..... 2
— Hex Bolts M6-1.25 x 10mm (Eye Shield) 4
— Flat Washers 7mm (Eye Shield) ............. 4
— Phillips Head Screws #10-24 x
3 ⁄
8
"
(Eye Shield) ............................................ 4
— Flat Washers 8mm (Tool Rest) .............. 4
— Hex Bolts
5 ⁄
16
"-18 x 3 ⁄
4
" (Tool Rest) ......... 4
Figure 3. Left eye shield assembly.
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 4. Left tool rest
B
C
D
E
F
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed. Check mount-
ing locations before assuming that any
items from the inventory list are missing.
Inventory