Grizzly G9907 - Manual (Page 7)

G9907 Triangular Sander
-5 -
MAINTENANCE
General
Regular periodic maintenance on your
Model G9907 Triangular Sander will
ensure its optimum performance. Make a
habit of inspecting your sander each time
you use it. Check for the following condi-
tions and repair or replace when neces-
sary:
1. Loose fasteners.
2. Worn switch.
3. Worn or damaged cords and
plugs.
4. Worn or damaged sanding pad.
5. Any other condition that could
hamper the safe operation of this
machine.
Keeping Tool Clean
Your G9907 Triangular Sander will give
you years of trouble free service if you
keep it clean and free of built-up dust or
grime. Ensure that no air passages get
blocked. If they do, blow them out with
compressed air. WARNING: Wear safety
glasses when cleaning tool with com-
pressed air.
Plastic parts can easily be cleaned with a
damp cloth, but never use water to clean
any electrical parts. Solvents should also
be avoided on plastic because of the pos-
siblity of damage.
If possible use a scraper to remove glue or
sap from your work; these elements may
hinder the effectiveness of the abrasive
sheets and cause unnecessary build-up of
grime on the sander.
Repair and Service
All quality tools will eventually wear from
normal use. Since sander is encased in a
double insulated plastic cover, leave repair
and service issues to a qualified service
technician. This includes brush replace-
ment, lubrication or any other internal
operation.
Disassembly and improper reassem-
bly of this device can result in elec-
trical shock danger. Always have this
device serviced by a qualified electri-
cal repair technician. Serious injury
will result.