Grizzly H3272 - Manual (Page 2)

1.
READ THIS ENTIRE MANUAL BEFORE OPERATING THE COMPRESSOR.
2.
OPERATE THE COMPRESSOR IN A WELL VENTILATED AREA.
3.
NEVER AIM THE AIR NOZZLE DIRECTLY AT YOURSELF OR OTH- ERS.
4.
DO NOT USE THE COMPRESSOR FOR FILLING BREATHING OR DIV- ING APPARATUS.
5.
ALWAYS WEAR SAFETY GLASS- ES WHEN OPERATING THIS MACHINE.
6.
DO NOT USE A TOOL THAT REQUIRES MORE THAN THE COM- PRESSORS CFM AND PSI RATING.
Safety
This
1 ⁄
8 HP Mini Air Compressor is ideal for
most air brush sets. Portable design fea- tures automatic shut-off at 38 PSI, a mois- ture trap, an air brush holder and a coiled air hose. CFM at maximum PSI is 0.48 and the total weight is 7 lbs.
Introduction
The Model H3272 Mini Air Compressor is wired for 110V, single-phase operation only. To operate the mini air compressor: 1.
Make sure the compressor is discon- nected from the power source.
2.
Connect your coiled air hose to the
1 ⁄
4 "
NPT connector on the air filter. Note— Use teflon tape on the treads of the fit- tings.
3.
Connect the air brush or other air tools to the compressor.
4.
Plug the compressor in and press the switch to start it.
5.
Disconnect the air tool and unplug the compressor when not in use.
Operations
Regular periodic maintenance on your air compressor will ensure its optimum performance. Make a habit of inspect- ing your compressor each time you use it. Check the following items: •
Clean off the cylinder head.
•
Check for worn or damaged cords and plugs.
•
Check for any other condition that could hamper the safe operation of this machine.
•
Check for loose bolts or fittings.
•
Check air lines and connectors to make sure they are in good condition.
•
Drain the moisture trap periodically.
Maintenance
Set Up
The Model H3272 was shipped in a care- fully packed box. Inspect the machine for damages due to shipping. If you have con- cerns please contact us. Contact informa- tion is on the back page. Place the Model H3272 on a flat surface in a well ventilated, dry area where tempera- tures will not exceed 90˚F. The Model H3272 is an oilless compres- sor.
DO NOT ADD
OIL.
Always wear safety glasses and use extreme caution when working around compressed air.
Always unplug compressor when performing maintenance or chang- ing air tools.
Model H3272 Mini Air Compressor
Ref#
Part#
Description
101
PH3272101
Motor
102
PH3272102
Front Case
103
PH3272103
Front Cover
104
PH3272104
Capacitor/On/Off Switch
105
PH3272105
Piston Rod
106
PH3272106
Ball Bearing
107
PH3272107
Crankshaft
108
PSB10M
Cap Screw M5-.8 x 15
109
PH3272109
Inlet & Exhaust Plate
110
PSB57M
Cap Screw M3-.5 X 6
111
PH3272111
Cylinder
112
PH3272112
Compression Ring
113
PH3272113
Collar
114
PH3272114
Cylinder Base
115
PH3272115
O-Ring
116
PH3272116
Valve Plate Set
117
PH3272117
O-Ring
Ref#
Part #
Description
118
PH3272118
Cylinder Head
119
PH3272119
Release Valve
121
PN02M
Hex Nut M10-1.5.
122
PH3272122
Handle
123
PH3272123
Handle Screw
124
PH3272124
Connector
125
PH3272125
Water Filter
126
PH3272126
Connector
127
PH3272127
Air Hose Nut
128
PH3272128
Air Hose
129
PH3272129
Air Hose Nut
130
PH3272130
Connector
1 ⁄
4
NPT
131
PH3272131
Elbow
132
PH3272132
Pressure Switch
133
PS09M
Phlp Hd Scr M5-.8 X 10
134
PS77M
Php Hd Scr M5-.8 x 140
135
PS78M
Phl Hd Scr M4-.7 x 45