GarrettCom TB14H User Manual
Page 40
TB14 and TB14H 10Mb Media Converters
Installation and User Guide
31
www GarrettCom com
.
.
3.6 Connecting Ethernet Media
It is recommended that both of the media (TP and BNC) be connected with
power off so that both ports are connected when power is applied to the logic in the
electronics. If power is on, connect the Twisted Pair media before the BNC media. If
BNC is connected before TP with power on, it can create a Jabber condition, in which
case the JAB LED will come on and no packets will be processed.
See Sections 4.4 for details of the LEDs on the media converter models.
3.6.1
Connecting Twisted Pair (RJ-45 ports)
The following procedure describes how to connect a 10BASE-T twisted pair
segment to the RJ-45 port on the Magnum Media Converters. The procedure is the same
for both unshielded and shielded twisted pair segments.
1.
Using standard 10BASE-T media, insert either end of the cable with an RJ-45