GE 0007 - Manual (Page 27)

7
Handset Name
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the
HANDSET
NAME sub-menu.
. Press mute/menu OK button to enter the menu. HANDSET NAME shows in
the display.
. Use the touch-tone pad to enter a name (up to 15 characters). More than one
letter is stored in each of the number keys. For example, to enter Bill Smith, press
the  key twice for the letter B. Press the  key  times for the letter I. Press the
5 key  times for the letter L. Press the 5 key  times for the second letter L, and
press the 1 key to insert a space between the first and last name. Press the 7 key
 times for the letter S; press the 6 key once for the letter M; press the  key 
times for the letter I; press the 8 key for the letter T; press the  key twice for the
letter H.
NOTE: If you make a mistake, use the delete/intercom/conf button
to backspace and delete one character at a time.
. Press the mute/menu OK button to save your name. You will hear a confirmation
tone and the handset name shows in the display.
Ringer Tone
You may choose from ten different ringer tones and ten different melodies.
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the
RINGER TONE
sub-menu.
. Press mute/menu OK button to enter the menu. SET RINGER TONE 01 shows in
the display. 01 is default setting.
. Use the CALLER ID-VOLUME ( 6 or 5) button to scroll to the desired setting (1
through 0). You will hear a sample of the ringer tone/melody you select.
. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the selected ringer tone shows in the display.
NOTE: You must have the Ringer Volume set to ON for ring tone to
signal an incoming call.