Stovax Stockton 7 7125F - Manual (Page 4)

These instructions cover the fitting of the Smoke Control Kit
4
1. PARTs LIsT
• Smoke Control Air slider (Stovax Part No. ST5SCKIT)
2. INsTALLATION
2.1 To install the Smoke Control kit:
• Remove internal packaging and Log Guard, Diagram 7
2.2 • Remove the two bolts on the Airwash chamber
These are located on the inside of the stove, Diagram 8
Airwash
Chamber bolt
Inside the appliance
Airwash
Chamber bolts
2.3 • Rotate and pull the Airwash chamber through the front of
the appliance to remove, Diagram 9
Airwash
Chamber
2.4 Replace the Airslider with the Smoke Control version,
Diagram 10
Airwash Chamber
Air slider
2.5 Fitting is the reverse of the above
2.6 Ensure the Air slider screws are tightened to a tension that
ensures movement when the Airwash is operated. The Air
slider must be positioned correctly and not rest on the inlet,
Diagram 11
Incorrect Correct
Gap
2.7 Replace packaging
INsTALLATION INsTRucTIONs