Grizzly Grizzley Air Body H8214 - Manual (Page 5)

Model H8214 Air Body Saw -3 -
INTRODUCTION
H8214 Inventory Qty
A. Tool Oil Bottle.....................................1
B. Air Body Saw......................................1
C.
1 /
4
" NPT Male Quick Connect Fitting..1
D. Saw Blades.........................................2
E. Hex Wrenches (1.5mm, 3mm)...1 each
Cuts per Minute..........................5000 CPM
No Load Speed..........................5000 RPM
Air Consumption...............................2 CFM
Air Inlet..................................................... 1 ⁄
4
"
Required PSI.....................................90 PSI
Maximum PSI..................................120 PSI
Maximum Sound Level.....................108 dB
Weight...............................................1.6 Lbs
Specifications Foreword
The specifications, details, and
photographs in this manual represent
the Model H8214 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Figure 1. Model H8214 Inventory.
A
B
C
D
E
Inventory