Generac 0H0923PMNL - Manual (Page 7)

ITEM PaRT NO. DEsCRIPTION QTY
6A008 0D34540108 DoWEL, HEAD To BLock 4
6010 0H09230149 BARE BLock 1
6026 0F7316B111 PLuG, 1.75ss, cuP, 4 LEFT, 4 RiGHT,2REAR 10
6026 0H09230164 PLuG, 13.84mm, cuP, FRoNT 2
6026 0D34540103 PLuG, 3/8-18X.425 sockET HEAD 2
6026 0E96180118 PLuG, 38.3mm, cuP, ss, 1 FRoNT, 1 REAR 2
6345 0F19600111 BoLT, mAiN cAP, m10X1.5X94.5, HEX HEAD*** 11
6345 0F19600113 sTuD BoLT, m8X1.25Xm10X1.5X126*** 1
6345 0F1960A176 BoLT, mAiN cAP, m9X1.25X53 HEX HEAD*** 12
6A346 0D34540145 DoWEL, mAiN cAP 12
8555 0H09230166 TuBE, WATER, FoR HEATER 1
18663 0H09230137 TuBE, WATER 1
6397 0F97650111 PiN, DoWEL, To TimiNG cvR.,8.0X45.5 (Hm2) 2
NoT sHoWN 0H09230201 NuT, m12 4
NoT sHoWN 0H09230202 BoLT, mouNT To BLock,m10X1.5X28.5 4
NoT sHoWN 0H09230191 BoLT, mouNT To BLock,m10X1.5X70 4
Hm1 0H09230193 PiN, DoWEL, To TimiNG cHAiN GuiDEs 2
HB1 0H09230198 scREW, kNock sENsoR, m8X30mm 1
*** Do NoT RE usE mAiN BEARiNG cAP BoLTs
5
6.8L Gas Engine Cylinder block
Note: The right and left banks of engine are determined by viewing the engine from the flywheel side.