GE 97845 - green - Manual (Page 9)

9
VI. Software Installation
Software installation is only required for
Windows
® 98 and 98 SE users. Users of
all other Operating Systems, including
Windows
® 2000, VISTA, XP and any
Mac ® OS, may skip this section.
1) Connect the hub to your computer.
2) Windows ® 98 and 98 SE will detect the
hub and automatically run the “Add New
Hardware Wizard”.
3) When the initial screen appears introducing
the “Add New Hardware Wizard”, click Next.
4) Select “Search for the best driver for your
device (Recommended): and click Next.
5) When asked to select a location to search for
the drivers, use the default selection. Do not
change the location. Click Next.
6) Click Next to accept the location the driver
will be installed in.
7) On the fi nal screen notifying you that the
driver has been installed, click Finish.