Grizzly H3140 - Manual (Page 23)

Model h3140 (Mfg. after 6/02)
-21-
SEcTiON 6: MAiNTENANcE
Always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Before Each use, check and correct:
•
loose mounting bolts.
• damaged or worn sanding belt.
• Worn or damaged wires.
• any other unsafe condition.
After Each use:
•
Clean/vacuum dust buildup on table and
motor.
Schedule
Cleaning the Model h3140 is relatively easy.
Vacuum excess sawdust, and wipe off the remain-
ing dust with a dry cloth. Wiping the table clean
after every use ensures moisture from wood dust
does not remain on bare metal surfaces.
if any resin has built up, use a resin dissolv-
ing cleaner to remove it. after cleaning, treat all
unpainted metal surfaces with a non-staining
lubricant with products like g96
® gun treatment,
slipit ® , or boeshield ® t-9.
cleaning
Lubrication
since all bearings are sealed and permanently
lubricated, simply leave them alone until they
need to be replaced.