Step 4: acquire satellite signals – Garmin Forerunner 450CX User Manual
Page 7
Forerunner 405CX Quick Start Manual
The Forerunner uses your user
profile to calculate calorie
consumption. Using the table on
activity class.
If you are using an ANT+ heart
rate monitor, select
Yes
during the
configuration to allow the heart rate
monitor to pair (connect) with your
Forerunner. See
for more
information.
Step 4: Acquire Satellite
Signals
To set the correct time of day and
begin using the Forerunner, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
noTe: To turn off the GPS
receiver and use the Forerunner
indoors, touch and hold
gPS
.
Select
off
for
gPS
.
noTe: You cannot acquire
satellites in power save mode. To
exit power save mode, press
enter
or
quit
.
1. Go outdoors to an open area. For
the best reception, make sure
the antenna of the Forerunner is
oriented toward the sky.
Antenna
location
2. Touch and hold
training
to enter
training mode.
3. Stand still and do not begin
moving until the locating satellites
page disappears.
When you are receiving satellite
signals, the GPS icon appears in
the training mode pages.