GE 20309 - Manual (Page 10)

10
Code Identification
The Code Identification Feature allows you to identify the 4 digit
library code stored under your device key. For example, if you want
to find out what 4 digit code is stored under your TV device key,
follow the six steps below:
1. Press and hold the SETUP button until the red indicator
stays on. Release the SETUP button.
2. Press and release the desired mode button (TV, VCR,
etc.). The red indicator blinks, then stays lit.
3. Press and release the SETUP button. The red
indicator blinks once and remains lit.
4. To find the first digit for the code stored under the
mode key pressed in step 2, press each numeric key
from 0-9 in turn. The number that causes the indicator
light to blink is the first digit
in your code.
5. To find the second digit,
repeat step 4, this time when
the red indicator blinks off
this is the second digit.
6. Repeat step 4 to find the third
and fourth digits.
Using Your Remote