Garmin STYLUS CX5800F - Manual (Page 12)

12 Copying a Photo or Document
Copying a Photo
1. Press the P On button to turn on the Epson Stylus
CX5800F. You see a screen like this:
2. Place the photo on the glass as described on page 9. Be sure to close the
document cover.
3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo paper. See
page 7 for details.
4. Press the Copy button. You see this display:
5. If you want borderless photos (printed without a
white border), press the Copy button again to select
Fit to Page mode. (If you select 100% , photos are
printed with a 0.12-inch [3 mm] border.) The
display changes to this:
6. To make multiple copies (up to 99), press the number keys on the numeric
keypad. The display shows the number you select.
Note:
If you need to cancel the number of copies selected, press the
y Cancel/Back
button. To exit Copy mode, press the y Cancel/Back button again.
7. Press the paper type button to select Photo Paper .
8. Press the paper size button to select Letter , 4”x 6” , or 5”x 7” .
9. To make a color copy, press the x Start Color button.
To make a black and white copy, press the x Start B&W button.
Printing appears on the display and the Epson Stylus CX5800F starts copying.
If you need to stop copying, just press the y Cancel/Back button. Do not pull
out paper that is being printed; it will be ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
When making a lot of copies, it is a good idea to remove the printed copies from the
output tray after every 10 sheets or so.
12:00 PM Y
Copies:1 100%
Copies:1 FitPage