GE Monogram ZDIB50 - Manual (Page 16)

FREE STANDING INSTALLATION
For the Installer
When this icemaker is installed free standing (not under a counter) we
strongly recommend that the bottom rear corners of the icemaker be
fastened to the floor to prevent accidental tipping.
Recommended Grounding Methods
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUND PRONG.
For your personal safety, this appliance must be
properly grounded.
This appliance is equipped with a power supply cord
having a 3-prong grounding plug. To minimize
possible shock hazard, the cord must be plugged into
a mating 3-prong grounding type wall receptacle,
grounded in accordance with the National Electrical
Code and local codes and ordinances. If a mating wall
receptacle is not available, it is the personal
responsibility and obligation of the customer to have a
properly grounded 3-prong wall receptacle installed
by a qualified electrician.
16
Power Supply
Cord
3-Prong
Grounding
Plug
3-Prong
Grounding Type
Wall Receptacle
INSTALLATION REQUIREMENTS
IMPORTANT…Please Read Carefully
For the Electrician—Electrical Requirements
A 115 Volt, 60 Hz, AC only, 15 Amp fused electrical supply is required
(time delay fuse or circuit breaker is recommended). It is recommended that
a separate circuit, serving only this appliance, be provided. DO NOT use an
extension cord.
ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.