GE 55927740 - Manual (Page 24)


• If you see a number with 11 digits (i.e. 1-234-555-1234), then the call received was
not from your area code.
2. Press the DIAL button and the display shows PICKUP or ADJ. A 10 second timer also
starts in the upper right side of the display, letting you know the time remaining
until the unit returns to the Summary Screen. If you adjust the number to be dialed,
the timer automatically resets itself.
3. To adjust the phone number, press the DIAL button. For instance, a 7-digit local
number sometimes cannot be dialed because it requires a 10-digit or 11-digit
format. Press the DIAL button repeatedly to scroll through the 7, 10, and 11-digit
numbers.
7-digits: 7-digit telephone number (i.e. 555-5555)
10-digits: 3-digit area code + 7-digit telephone number (i.e. 425-555-5555)
11-digits: long distance code 1 + 3-digit area code + 7-digit telephone number
(i.e. 1-425-555-5555)
4. To dial the displayed number, pick up the handset or press the SPEAKER button
before the timer reaches 0. NOW DIALING shows in the display and the number is
dialed.
If you did not program your local area code in the setup menu
1. Use the NEXT and REVIEW buttons to scroll to the number you want to dial. You will
only see 10-digit numbers (i.e. 234-555-1234).
2. See steps 2 through 4 in the above section to complete the dial back sequence.
NOTE: To cancel Dial Back, press PLAY/STOP or wait for the unit to
return to the ready-to-answer mode.
Memory
You can store up to 13 numbers in memory for quick dialing – 3 in the quick dial
buttons and 10 in the keypad numbers (0-9). Each memory location can store number
up to 28 digits.