Grizzly G7298 - Manual (Page 9)

H4378/H4379 Slimline Bench Grinder -7-
SECTION 4: ASSEMBLY
Unpacking
The Model H4378/H4379 is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you have
signed for delivery, immediately call Customer
Service for advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Piece Inventory
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify specific parts, please
refer to the detailed illustrations at the end of
the manual.
After all the parts have been removed from the
carton, you should have:
• Grinder
• Bolts (4)
• Washers (6)
• Knobs (2)
• Adjustable Rests (2)
• Eye Shields (2)
• Spark Breakers (2)
• Cooling Tray
NOTICE
When mounted, the cooling tray can be easi-
ly damaged if the grinder is tipped forward.