Rs-232 serial control – Gefen EXT-TV-MFS User Manual
Page 18
14
RS-232 SERIAL CONTROL
RS232 Settings
Bits per second ................................................................................................... 9600
Data bits .................................................................................................................... 8
Parity .................................................................................................................. None
Stop bits .....................................................................................................................1
Flow Control ....................................................................................................... None
5 4 3 2 1
9 8 7 6
1 2 3 4 5
6 7 8 9
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
IMPORTANT: When sending RS-232 commands, a carriage return
and a line feed character must be included at the end of each line.
Commands are not case-sensitive.
t