Monogram, 1/4" framed panel dimensions, Side panels – GE Monogram ZISB420DM User Manual

Page 2

Advertising
background image

Monogram.

ZISB420DM – GE Monogram 42" Built-In Refrigerator

with Dispenser and Water Filter

1/4" FRAMED PANEL DIMENSIONS

If you choose to install framed panels, they must
be cut to the dimensions shown. The panels will
slide into the frame on the door and grille.

If the custom panel is less than 1/4" thick and it
fits loosely in the door frame it can be backed up
with a piece of filler material or foam tape to
improve the fit.

1/4"

Panel

Door

5/16"

Trim

Reveal

IMPORTANT NOTE: Maximum weight for fresh food panel is
50 pounds and 30 pounds for freezer panel.

IMPORTANT NOTE – Dispenser Models

The refrigerator is supplied with two dispenser trims,
one for framed panels and one for overlay panels.

• If the panel is less than 0.250" thick a noticeable gap

may be created around the dispenser trim. Foam
tape may be applied on the door to improve the fit.

• If the panel is more than 0.250" thick, the dispenser

trim cannot be secured to the door.

Fresh Food

Panel

Freezer

Panel

24-9/16

14-9/16

17-13/16

3-1/8

39-7/8

9-1/2

Grille Panel

68-3/8

Dispenser

Cutout

9-5/8"

Dispenser Cutout

15-3/8"

The framed panel
must be 1/4" nominal
thickness to fit the
dispenser trim.

SIDE PANELS

Side panels must be used whenever
the sides of the refrigerator will be
exposed. The 1/4" side panels will
slip into the side case trim. Order
the side panels from the cabinet
manufacturer.

* Depending on installation height.

*84"

2-9/16"

24"

*3" to 4"

As an ENERGY STAR

®

Partner,

GE has determined that this product

meets the ENERGY STAR

®

guidelines for energy efficiency.

For answers to your Monogram,

®

GE Profile

or

GE

®

appliance questions, visit our website at

GEAppliances.com or call
GE Answer Center

®

service, 800.626.2000.

R

Listed by
Underwriters
Laboratories

Specification Revised 8/03

110170

Advertising