Stovax Fusion 8687 - Manual (Page 3)

3
USER INSTRUCTIONS
1. CONTROLS ACCESS
To access the fire's controls with a Futura Frame fitted:
• Push the control panel firmly in the centre to release the
magnetic catch
Details of the controls (and Replacing the Batteries, if applicable)
are given in the User section of the fire’s Instruction manual.
2. CLEANING THE FRAME
Only clean the frame when it is cold.
• Clean the glass with a non-abrasive proprietary glass
cleaner and wipe over with a soft cloth
INSTALLATION
INSTRUCTIONS
Covering Models 8687
1. GENERAL
1.1 These instructions are supplemental to, and must be read in
conjunction with, the Installation Instructions (PR0741 for
E-Studio & Logic E-Box Conventional Flue and the
Balanced Flue version in PR0776) supplied with the fire.
1.2 Fitting of the Futura frame must be carried out after the
appliance has been fully installed and commissioning
tests completed.
2. PREPARATION OF WALL FIXING FOR
FUTURA
The Futura is in two parts: a back panel which fits to the wall; a
front panel that hooks onto the fixed back panel.
4.1 BACk PANEL
The back panel hooks onto a wall bracket (supplied).
• Find the fire's centre point across its width and mark
• Mark 1081 mm from the hearth or base of appliance (if
wall mounted) to establish the correct height
• Centre the wall bracket above the fire and at the
distance from the hearth or base of appliance (if wall
mounted) shown in Diagram 1
1
AR2170
height measured to the
centre top of bracket =
1081mm
centre point
1081mm
4.2 To fix the wall bracket:
• Secure the bracket into place with the screws supplied
• Lift and hook the back panel onto the bracket
• Centre the back panel, Diagram 2
• Secure the back panel through the firebox using the
fixings next to the controls, Diagram 3
2
AR2171
3
AR2174
Covering the following frames:
Futura: Model number 8687
Futura