Chapter two, 2 connecting a monitor/ flat display – GIGABYTE 4635 User Manual
Page 20
Advertising
15
CHAPTER TWO
2.2 Connecting a Monitor/ Flat Display
Check the connectors on your monitor; many monitors have both a VGA (analog)
connector and a DVD-I (digital) connector. If the monitor has both connectors, use the
DVI-I connection as digital provides a better quality signal.
The following directions refer to connecting a VGA:
1. Connect the cable to the VGA connector on the HA91. Tighten the securing screws.
2. Connect the other end of the cable to corresponding connector on the monitor and
tighten the securing screws.
Advertising