GE 28213 Series - Manual (Page 35)

5
5. Use the touch-tone pad to enter the telephone number (up to 0 digits, including
pauses), and press the mute/menu button to confirm and advance SET MELODY
sub-menu.
6. Use the caller ID-volume (5 or 6) button to select from melody 01 to melody 10
(a testing tone is generated while making melody selection).
7. Press mute/menu OK button to confirm, the records are stored alphabetically in
the phone book.
Inserting a Pause in the Dialing Sequence (of a
Stored Number)
Press the #pause/ringer button on the handset’s touch-tone pad to insert a delay in
dialing sequence when a pause is needed to wait for a dial tone (for example, after you
dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as
one digit in the dialing sequence.
Edit Records
From Phonebook Sub-Menu:
1. Use the
caller ID-volume (5 or 6) button to scroll to EDIT RECORDS.
. Press the mute/menu OK button to confirm, display will show the records.
. Use the caller ID-volume (5 or 6) button or key in alphabet to move to desired
record, press mute/menu OK button to confirm. The screen displays ENTER
NAME.
. Repeat Steps  through 7 in “Add Records” section.
Delete Records
From Phonebook Sub-Menu:
1. Use the
caller ID-volume (5 or 6) button to scroll to DELETE RECORDS.
. Press the mute/menu OK button to confirm, display will show the records.
. Use the caller ID-volume (5 or 6) button or key in alphabet to move to desired
record, press the delete/int/conf button. The screen displays DELETE?.
. Press the delete/int/conf button again to confirm.
NOTE: If you don’t want to change or delete a record, simply press
the END button, or wait for one minute to exit automatically.