Grizzly STIRLING ENGINE KIT 3 H8103 - Manual (Page 6)

-4-
h8103 stirling Engine Kit 3
Setup & assembly
the following items are recommended to com-
plete the setup process, but are not included with
your machine.
Description Qty
• lathe & Mill (or lathe/Mill) ......................... 1
• Metric tap & die set .................................. 1
• digital Calipers w/ inch/MM Conversion .... 1
• safety glasses ........................................... 1
• set screw M3-.5 x 8 ................................... 1
• set screw M3-.5 x 10 ................................. 1
• phillips head screws M3-.5 x 8 ................. 4
• Cap screws M4-.7 x 8 ................................ 4
• Cap screw M4-.7 x 25 ............................... 1
• Cap screw M5-.8 x 20 ............................... 1
• Cap screw M5-.8 x 30 ............................... 1
• Flat Washers 3mm ..................................... 2
• hex nuts M4-.7 .......................................... 4
• hex Wrenches 3,4mm ...........................1 Ea
• small needle nose pliers .......................... 1
• standard screwdriver 3mm ........................ 1
• phillips head screwdriver #1 ..................... 1
• Compressed Air (for cleaning) ... As needed
• light Machine oil ....................... As needed
Recommended for
Setup
this product was carefully packed when it left our
warehouse. if you discover the contents are dam-
aged after you have signed for delivery, please
immediately call Customer Service at (570) 546-
9663 for advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, use the next three pages to
inventory the contents.
unpacking
Metric Sizing
the components in these plans were designed
to be machined to metric sizes and using metric
threads.
if you are not familiar with metric sizing or metric
threads, we recommend that you purchase a
digital caliper with the capability of doing mm/inch
conversions. We also recommend that you get a
metric tap & die set for easily making the threads
required.
For your convenience, below are common metric/
inch equivalents:
1" = 25.4mm •
1mm = 0.040" •
Overview
Assembling the Model h8103 requires basic
machining techniques, skills, and equipment—
making this a great project for the hobby or aspir-
ing machinist who is looking for a challenging and
fun project.