Gateway PLU-300 - Manual (Page 57)

53
About the Powerline configuration utility
www.gateway.com
Changing the Gateway Powerline private
network password
To change the Gateway Powerline private network
password:
1 Click Start , Programs , Gateway Powerline Adapter , then click
PLU-300 or PLE-310 . The Gateway Powerline Adapter
Configuration Utility starts and the utility scans the
Powerline network for Powerline devices that are
connected to the network.
2 In the Device list, click to highlight the networked device
to change the network password.
3 Click Connect . The utility connects to the Powerline
device.
4 Click the Security tab.
5 Type the new password in the Networked Password box,
then click Set Local . The password changes.
6 Click OK . The utility closes.
Restoring the Gateway Powerline network
password to the default password
To restore the Gateway Powerline network password
to the default password:
1 Click Start , Programs , Gateway Powerline Adapter , then click
PLU-300 or PLE-310 . The Gateway Powerline Adapter
Configuration Utility starts and the utility scans the
Powerline network for Powerline devices that are
connected to the network.
2 In the Device list, click to highlight the networked device
to change the network password.
3 Click Connect . The utility connects to the Powerline
device.