Grizzly 3/8" Impact Wrench w/ Front Exhaust H8119 - Manual

Specifications
Drive Size ........................................................ 3 ⁄
8
"
Free Speed ..........................................7,000 rpm
Maximum Torque .................................. 145 ft/lb.
Air Inlet ....................................................
1 ⁄
4
" NPT
Average Air Consumption .......................... 4 cfm
Weight ......................................................3.3 lbs.
Inventory
A. Impact Wrench ........................................... 1
B. Oil Bottle ..................................................... 1
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in
Figure 2.
Otherwise, lubricate multiple times daily with 2–3
drops of pneumatic tool oil. Insert the oil directly
into the air fitting as shown in
Figure 3.
MODEL H8119
3 ⁄
8
" IMPACT WRENCH
w/FRONT EXHAUST
INSTRUCTION SHEET
Figure 1. Model H8119.
Figure 3. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © JANUARY, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR8963 PRINTED IN TAIWAN
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury.
INJURY HAZARD!
When servicing, always dis-
connect tool from air to pre-
vent unexpected operation.
120 PSI
MAX AIR PRESSURE!
Exceeding this PSI may
result in injury/tool damage.
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2. Installing your tool.