Generac 004614-1 - Manual (Page 27)

Generac ® Power Systems, Inc. 25
Figure 2.5 – Typical Noise Abatement 2.2.4 COMPARTMENT FLOOR CUTOUTS
You must provide openings in the generator compart-
ment for the following items (Figure 2.6):
• Engine exhaust and cooling air outlets
• Generator cooling air inlet and front service door
• Four holes for passage of generator mounting
bolts. See Section 2.1.4 (Page 23)
• Rear service door.
Fuel lines and exhaust piping must not pene-
trate into the vehicle living area.
◆
Section 2 – Installation
QUIETPACT™ 65D Recreational Vehicle Generator
Figure 2.6 – Compartment Floor Cutout