Adding or replacing a hard drive, To add or replace a hard drive – Gateway GM5688E User Manual
Page 55
Advertising
www.gateway.com
47
Adding or replacing a
hard drive
To add or replace a hard drive:
1
Remove the side panel by following the instructions in
“Removing the side panel” on page 35
.
2
Disconnect and label all hard drive cables, noting their
locations and orientation. (You will reconnect the cables
after you install the new drive.)
3
Disconnect the hard drive cage fan cable from the
system board.
Tools
You need a Phillips screwdriver to add or replace a hard drive.
8512418.book Page 47 Friday, May 11, 2007 11:44 AM
Advertising