Gateway ALR 9200 - Manual (Page 58)

46 Maintaining and Troubleshooting the Gateway ALR 9200 Server
Figure 13: Removing the Diskette Drive
5. Remove and save the screw that secures the diskette drive carrier to the
side of the 5.25-inch drive bay.
6. Slide the carrier toward the back of the chassis to disengage the tabs
from the slots in the side of the 5.25-inch drive bay.
7. Remove the carrier/drive from the chassis and place it component-side
up on an antistatic surface.
3424.boo Page 46 Wednesday, September 2, 1998 9:23 AM