Garmin FA168CPS - Manual (Page 29)

– 29 –
Paging Feature Paging Feature Paging Feature Paging Feature
Manual Paging Manual Paging Manual Paging Manual Paging
Your system may be set up so you can manually send a message to up to four
(FA168CPS) or two (FA148CP) pagers.
• Your installer programs the paging function key and the pager phone numbers.
• Pressing the paging keys sends the message
9 9 9 – 9 9 9 9 to the selected pager .
• This message could mean “call home”, “call your office”, or any other prearranged
meaning.
• See the Paging chart at the back of this manual for details of the paging setup for
your system.
1. Press and hold the programmed Paging Key for at
least 2 seconds (wait for beep), then press the pager
number (1-4)* representing the pager intended to
receive the message.
2. The recipient, on seeing the 999–9999 message, will
understand the prearranged meaning of this signal.
* If no number is pressed, the message is sent to pager 1 .
Pagers 1-4 for FA168CPS series; 1-2 for FA148CP series
Alpha Display:
DISARMED
READY TO ARM
Fixed-Word Display: READY
999-9999
Pager Display
Latch Key Paging Latch Key Paging Latch Key Paging Latch Key Paging
You can program a schedule that causes a pager report to be sent if the system is not
DISARMED by the scheduled time (see Scheduling section, event “03”). For example,
a working parent might want a message to be sent to a pager if their child did not
arrive home from school and disarm the system by a certain time.
If programmed, the message that is sent is: 7 7 7 – 7 7 7 7 .