Xiii. tool data, Grizzly model g3690 angle finish nailer – Grizzly G3690 User Manual
Page 16
G3690 Grizzly Imports, Inc. - 13 -
GRIZZLY MODEL G3690 ANGLE FINISH NAILER
Operating Air Pressure:
Softwood:
..........................................................................................................80 to 100 PSI
Maximum Air Pressure ................................................................................................120 PSI
Hardwood:
........................................................................................................90 to 120 PSI
Maximum Air Pressure ................................................................................................120 PSI
Nail Length:
........................................................................1-
1
/
2
" to 2-
1
/
2
" Clipped Head Finish Nails
Nail Gauge:
............................................................................................................................14 or 15
Magazine Capacity:
............................................................................100 @15 Ga. or 90 @ 14 Ga.
Construction:
............................................................................Cast Aluminum and Hardened Steel
Coupling System:
..................................................................................................................
1
/
4
" NPT
Recommended Lubricating Oil:
........................................................................Pneumatic Tool Oil
Gun Weight:
..........................................................................................................................5.95 lbs.
Parts and Accessories:
A rebuilding kit is available from Grizzly and includes all O-rings. The rebuilding kit and other
parts can be individually ordered through the appropriate service department.
Grizzly also carries an air hose, an in-line regulator/filter/water-separator/lubricator, quick con-
nect couplers, and a complete line of fasteners for this gun. Please refer to a current Grizzly cat-
alog for price and ordering information.
Specifications, while deemed accurate, are not guaranteed.
XIII. TOOL DATA