GE Industrial Solutions Digital Energy GT Series 1-3kVA - Tower Mount - Manual (Page 7)

OPM_GTU_TWR_1K0_3K0_XUS_V015 6 DE GT Series: User manual rev date 8-11- 04
Digital Energy ™ GT Series
g
1000VA
7 9
5
8
6
3
2
1
3
3
8
5 9
7
6
2
1
1500 / 2000 /
3000 VA
2.1 Package contents
The packing box contains a Digital Energy™ GT Series-UL UPS, an RS232 data cable, a CD
ROM and this manual. Carefully inspect the packing box and its contents. If any damage is
visible please immediately notify the carrier and/or dealer.
2.2 Location
Please refer to section 1.3 of ‘IM PORTANT SAFETY INSTRUCTIONS’
2.3 Rear panel
1 Input
AC utility supply power to the UPS
2 Input breaker
Protects the UPS from damage
caused by high input currents
7 Communication interface
RS232/dry contact. Allows communi-
cation between computer and UPS.
See chapter 4 for more detailed
information .
3 Output receptacles
To connect critical load to the UPS
4 Output circuit breaker
Protects the UPS from damage
caused by output overload
8 TVSS - Transient Voltage Surge
Suppressor (RJ-45/RJ-11): To
prevent damage caused by surges,
noise and spikes traveling over the
telephone or network line. (Optional)
5 DC connector
To connect external battery pack for
extended runtime
6 Fan
Electronically controlled cooling fan.
Make sure ventilation air can move
freely around and trough the UPS
9 SNMP Slot
An (optional) SNMP adapter can be
plugged into this port for managing the
UPS via the network. See chapter 4
for more detailed information.
2 - Installation
Fig. 2.1 Rear panels