Grizzly G1037 - Manual (Page 8)

-6- G1037 Planer / Moulder
Grizzly Industrial, Inc. is proud to offer the Model
G1037 Planer/Moulder. This Planer/Moulder is a
part of Grizzly’s growing family of fine woodwork-
ing and metalworking machinery. When used
according to the guidelines stated in this manual,
you can expect years of trouble-free, enjoyable
operation.
The Model G1037 is intended for home and medi-
um-duty professional use. This Planer/Moulder
features a 1,725 R.P.M., 1
1 ⁄
2
H.P. capacitor-start
motor, mechanical ON/OFF switch and a cast
iron table.
All running parts utilize shielded ball bearings,
which require no lubrication for the life of the
bearings.
We are also pleased to provide this manual with
the Model G1037. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our latest effort to produce the best docu-
mentation possible. If you have any criticisms that
you feel we should address in our next printing,
please write to us at the Bellingham, WA address
at the end of this section.
SECTION 3: GENERAL INFORMATION
Most important, we stand behind our machines.
We have two excellent regional service depart-
ments at your disposal should the need arise. If
you have any service questions or parts requests,
please call or write to us at the location listed
below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone:(570) 546-9663
Fax:(800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
To comment on this manual write to:
Grizzly Industrial, Inc.
C ⁄
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227
To operate this or any power tool safely and effi-
ciently, it is essential to become as familiar with it
as possible. The time you invest before you begin
to use your Model G1037 will be time well spent.
DO NOT operate this machine until you are com-
pletely familiar with the contents of this manual.