Grindmaster G & MG Series - Manual

Grindmaster Corporation
Canton Plant
480 Neponset St.
Canton, MA 02021 USA
Phone (502) 425-4776 (800) 695-4500
Fax (502) 425-4664
www.grindmaster.com
1103 Form# CC-399-04
Part# 90381
© Grindmaster Corporation, 2000
PRINTED IN THE USA
Crathco
®
Visual Granita Machine
Operation and Instruction Manual
for
G & MG Series Models
Prior authorization must be obtained
from Grindmaster Corporation
for all warranty claims.
Models G23-2B, G235-2B, G236-2B,
MG23-2B, MG235-2B & MG236-2B
TABLE OF CONTENTS
Introduction and Warnings......................................2
Installation............................................................2-3
Connection To Power Supply..................................3
Preparing Product ..................................................4
Operating Panel ......................................................4
Programming - G Series Electronic
Touchpad Model ..................................................4-6
Errors - G Series Electronic Touchpad Model ....6-7
Operating Panel Description-MG Series Traditional
Rocker Switch Model ..............................................7
Dispensing Product ................................................8
Adjustments ............................................................8
Cleaning & Sanitizing ........................................9-11
Maintenance ....................................................11-13
Crathco Granita Preventive
Maintenance Checklist ......................................14-15
Accessories ..........................................................16
Troubleshooting ..............................................17-18
Exploded View ................................................19-26
Crathco Granita G&MG Series Parts List ............27
Gear Motor Exploded View ..................................28
Refrigeration Diagrams....................................29-30
Electrical Diagrams..........................................31-33