GE ZV54 - Manual (Page 7)

Baffle grease
filters and
drip trays Island hood models have reusable metal grease
baffles and drip trays.
The metal baffles channel grease released by
foods on the cooktop into the drip trays. The
baffles also help prevent flaming foods on the
cooktop from damaging the inside of the hood.
For this reason, the baffles must ALWAYS be in
place when the hood is used. The grease baffles
and drip trays should be cleaned once a month,
or as needed.
To clean the grease baffles and drip trays,
drain and wipe all excess grease with a dry
paper towel. Soak them and then swish them
around in hot water and detergent. Don’t use
ammonia or ammonia products because they
will darken the metal. Do not use abrasives or
oven cleaners. Rinse, shake and let them dry
before replacing. They may also be cleaned
in an automatic dishwasher.
To remove:
Grasp both baffle knobs on each filter and
pull them up, forward and out. Grasp the
drip tray and carefully lift it up and out of
the hood track.
To replace the drip trays:
1.
Place and seat the drip tray into the
hood track.
2. Slide them left or right until all trays are
side-by-side in place in the track.
To replace the baffles:
1.
Hold the baffle at the bottom by one of
the knobs.
2. Place the other end of the baffle against
the inside front of the hood.
3. Slide it up and push the bottom end back
until it firmly seats into place.
7
Drip Tray
Drip Tray
Track
Baffle
Drip Tray Replacement
Baffle Replacement
Care and Cleaning
Professional Island Range Hood