GE UF-4000 - Manual (Page 17)

17
In
st
al
li
n
g
Y
o
u
r
Ma
c
h
in
e
Loading the Recording Paper
In general, most bond papers will produce excellent results. Most photocopy papers will also work very well.
There are many "name" and "generic" brands of paper available. We recommend that you test various
papers until you obtain the results you are looking for. For detailed recommended paper specifications.
(See page 108)
How to Load the Recording Paper
Paper Specifications
1 Remove the Paper Tray Cover.
2 (1) Load the paper into the Paper Tray while
pushing the Blue Paper Width Guide to the
left.
(2) Verify that the papers are fitted squarely
and firmly between the Paper Width Guide
and the right side of tray. If it does not, the
paper may feed into the printer incorrectly
resulting in a paper jam.
Caution: Make sure that the paper is set
under the Clips and that it does
not exceed the Maximum Paper
Capacity Mark. You can load
about 150 sheets (20 lb weight).
3 Re-install the Paper Tray Cover.
The Recording Paper Size setting of the Fax
Parameter No. 23 must match the paper
loaded in the cassette. If you change the
Recording Paper Size, please change the
setting accordingly. (See page 34)
Paper Width Guide
Clip
Max. Paper
Capacity Mark