Garmin zumo 665 - Manual (Page 10)

 zūmo 665 Owner’s Manual
Getting Started
Cradle
Knob
Handlebar base
Power cable
Base plate
Double-socket arm
Step 5: Installing Your zūmo in
the Mount
1. Fit the bottom of your zūmo into the
cradle.
2. Tilt the zūmo back until it snaps into
place.
Cradle
Power
cable
Release button
Removing Your zūmo from
Either Mount
1. Press the button on the side of the mount
to release the zūmo.
2. Lift out the zūmo.
3. Place the weather cap on the cradle
(motorcycle mount only).
Connecting the GXM 40 Antenna
to the Motorcycle Mount
Notice
Do not place the GXM 40 antenna on the
fuel tank or in any location where it may
come into contact with fuel or excessive
heat.
1. With the zūmo placed in the motorcycle
mount, remove the weather cap from the
mini‑USB connector on the Power cable.
2. Plug the GXM 40 antenna into the mini‑
USB connector.
3. Place the GXM 40 antenna within clear
view of the sky in an area where there is
at least 10 cm between the antenna and
your zūmo. For best performance, place
the GXM 40 antenna at least 30 cm away
from the zūmo.
NOTE: The GXM 40 antenna can also
be placed in an area covered by a non-
conductive material; such as a fiberglass
top-case, tank bag, or leather saddlebag.