Garmin zumo 665 - Manual (Page 23)

zūmo 665 Owner’s Manual 21
Using Hands‑free Calling
Using Hands-free
Calling
Using Bluetooth technology, your zūmo can
connect to your mobile phone to become a
hands-free device.
To determine whether your device with
Bluetooth technology is compatible with the
zūmo, go to www.garmin.com/bluetooth .
Pairing Your Devices
Bluetooth wireless technology establishes
a wireless link between devices, such as a
mobile phone and the zūmo. The first time
you use two devices together, you must
“pair” them by establishing a relationship
using a PIN/passkey. After the initial pairing,
the two devices can connect automatically
each time you turn them on.
To pair and connect, your device and the
zūmo must be turned on and be within 33
feet (10 meters) of each other. The zūmo can
be connected to a phone and a headset at the
same time.
Initiate pairing from your zūmo or from your
device. Refer to the instructions for your
devices.
When you turn on the zūmo, it tries to
connect to the last device to which it was
connected. You might have to set your device
to connect to the zūmo automatically when it
is turned on.
When your phone is connected to your
zūmo, you are ready to make phone calls.
From the Menu page, touch Phone to access
the Phone menu.
Pairing Your Phone Using the
Phone
1. Enable the Bluetooth setting on your
zūmo. Touch Tools > Settings >
Bluetooth .
2. Select Enabled .
3. Enable the Bluetooth component on your
phone. This might be in a menu called
Settings, Bluetooth, Connections, or
Hands‑free.
4. Initiate a search for Bluetooth devices.
5. Select the zūmo from the list of devices.
6. Enter
1234 into your phone.