GIGABYTE GZ-FSCA1-AN - Manual (Page 11)

11
English
4-4 Installation of Front I/O Panel
The front panel consists of (1) 2 USB 2.0 / 1 IEEE 1394 / 1 audio line-out jack; and
(2) a basic casing power switch control cable kit
Required tool: None
(1) 2 USB 2.0 / 1 IEEE 1394 / 1 Audio line-out jack
4-4-1 Insert the USB 2.0 connectors into the corresponding sockets on the motherboard.
USB 2.0 Connector Pin Definition Pin Definition
1 Power 6 USB Dy+
2 Power 7 GND
3 USB Dx- 8 GND
4 USB Dy- 9
5 USB Dx+ 10 USB Over Current
4-4-2 Insert the IEEE 1394 connector into the corresponding socket on the motherboard.
Please refer to the instructions supplied by the motherboard manufacturer and make sure
the correct type of connector prior to installation.
a. IEEE1394 Connector A Pin Definition Pin Definition
1 TPA+ 6 TPB-
2 TPA- 7
3 GND 8 +12V
4 GND 9 +12V
5 TPB+ 10 GND
b. IEEE1394 Connector B Pin Definition Pin Definition
1 TPA+ 6 TPB-
2 TPA- 7 +12V
3 GND 8 +12V
4 GND 9
5 TPB+ 10 GND
c. IEEE1394 Connector C Pin Definition Pin Definition
1 +12V 9 +12V
2 +12V 10 +12V
3 TPA+ 11 TPA1+
4 TPA- 12 TPA1-
5 GND 13 GND
6 GND 14
7 TPB+ 15 TPB1+
8 TPB- 16 TPB1-
Incorrect connector installation may possibly burn out the motherboard and other
components. Be sure to observe the instructions on installation in the manual. Any loss
arising from nonobservance of the proper operation provided is not covered by the
warranty.
Different motherboards may have different installation positions. For detailed
instructions, please refer to the instructions supplied by the motherboard manufacturer.