Goodmans GDR10 - Manual (Page 71)

71 71
ADR10 Set Top Box 71
ADR10 Digital TV Receiver
71 71
ADR10 Set Top Box 71
GDR10 Digital TV receiver
Electrical safety
Read the electrical-safety pages in this guide
you connect the receiver to the mains supply
.
carefully before
age as the voltage
it of your receiver.
ns supply. Do not
comes with a moulded plug. If
need to change
cover. If you lose
lug until you have
lacement plug cover or plug.
suitable for your
r it is damaged, you should remove it and fit the right plug
e. You must throw
t an electric shock if you use it
ad may not match
ou should follow these
instructions.
• You must connect the blue wire to the terminal marked with
the letter ‘N’ or coloured black.
• You must connect the brown wire to the terminal marked with
the letter ‘L’ or coloured red.
• You should not connect anything to the earth terminal of the
plug marked with the letter ‘E’ or coloured green.
Make sure your electricity supply is the same volt
printed on the label on the bottom of the main un
The receiver needs a 230-volt (V) 50-hertz (Hz) mai
use any other supply. The receiver
the plug breaks, you cannot reuse the plug. If you
the fuse in a moulded plug you must refit the fuse
or damage the fuse cover, you must not use the p
a rep
If you have to change the plug because it is not
socket, o
using the wiring diagram shown on the next pag
the plug away safely. You could ge
again.
The colours of the wires in the receiver’s power le
the coloured markings in your plug, so y