Mitsumi electronic HS-U449 - Manual (Page 33)

31
R
OUT AUDIO
L
R
VIDEO
OUT
L R L
HS-U449 RECORDING PLAYBACK
AUDIO OUT L
AUDIO OUT R AUDIO IN R
AUDIO IN L VIDEO IN VIDEO OUT
Using the HS-U449 to playback to another VCR
1 Connect one stereo audio cable to AUDIO
IN L and R on the recording VCR, and to
AUDIO OUT L and R on the HS-U449.
2 Connect a yellow video cable to VIDEO IN
on the recording VCR and to VIDEO OUT
on the HS-U449.
3 Set the audio monitor on the HS-U449 to
Stereo. If the other VCR is a mono VCR,
set the audio monitor on the HS-U449 to
Mono. See Selecting and adjusting the
audio and video functions on page 23.
4 Set the input of the recording VCR to
External.
5 Put a blank tape into the recording VCR.
6 Put the tape you want to copy into the
HS-U449 and find the cue point.
7 On the recording VCR, press REC, then
PAUSE.
8 On the HS-U449, press PLAY, then PAUSE.
9 Press the PAUSE buttons on both VCRs at
the same time to begin copying the tape.
10 Press STOP on both VCRs when you are
finished.
Editing Features