Memorex MX3710 - Manual (Page 9)

8
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER button to turn
the unit on; the STANDBY
indicator will go out.
1
Press the MEMORY/TIME SET
button ❶. Within four seconds,
press the REPEAT/PRE UP
button ❷ until the desired memory
number appears on the display.
2
1
4
Use the TUNING/CD SKIP/
SEARCH (
) ❶ or ( ) ❷
button to select a station.
3
2
1
3
Press the TUNER Function button
❶
; “TUNER” will appear in the
display. Press the BAND/
STOP(■) button❷ to select AM or
FM.
2
Press the MEMORY/TIME SET
button again to set the station in
the selected memory.
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased.
3 5
6
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
1 2
1
Adjust the PRESET EQ ❶ and
VOLUME ❷ buttons as desired.
2
1
3
Press the REPEAT/PRE UP
button to select a preset; the
station will automatically be tuned
in.
2
RECALLING RADIO PRESETS
MX3710.O/M.QXD 4/30/02 10:49 AM Page 8