MicroNet Technology SP916GK - Manual (Page 25)

- 22 - 22
Common configurations for WAN interface
Some settings can be configured with each WAN access types:
Enable Web Server
Access on WAN from
port To enable the user to access this Router through
Internet, enter the specific IP and the port number
Enable IPsec pass
through on VPN
connection Mark the check box to enable IPsec pass through on
VPN connection; clear the checkbox to disable.
Enable PPTP pass
through on VPN
connection Mark the check box to enable PPTP pass through on
VPN connection; clear the checkbox to disable.
Enable L2TP pass
through on VPN
connection Mark the check box to enable L2TP pass through on
VPN connection; clear the checkbox to disable.
Clone MAC Address When ISP use MAC address authentication (with
DHCP), then the MAC address of the Ethernet card
attached to your Cable modem must be registered
with the ISP before connecting to the WAN
(Internet). If the Ethernet card has changed, the new
MAC address must be registered with the ISP.
MAC cloning feature allows the MAC address
reported by WAN side network interface card to be
set to the MAC address already registered with the
ISP, eliminating the need to register the new MAC
address with the ISP. This feature does not change
the actual MAC address on the NIC, but instead
changes the MAC address reported by Wireless
Router to client requests. To Change the MAC
address, enter it in the text box.