Mitel KU990 - Manual (Page 17)

17
Set up
01
02
03
04
05
06
07
08
Installing the USIM and battery
5 Charging your phone
Slide back the cover of the charger socket
on the side of your KU990. Insert the
charger and plug into a mains electricity
socket. Your KU990 will need to be charged
until a message reading Fully Charged
appears on screen.
he
3 Install the USIM card
Slide the USIM card into the USIM card
holder. Make sure that the gold contact
area on the card is facing downwards.
To remove the USIM card, pull it gently
in the reverse direction.
4 Install the battery
Insert the top of the battery fi rst into the top
edge of the battery compartment. Ensure
the battery contacts align with the terminals
on the phone. Press down the bottom of the
battery until it clips into place.