Power sources – Memorex MPD8842 User Manual

Page 6

Advertising
background image

5

This unit requires either two (2) “AA” batteries (not included) or an AC

adapter (not included).

BATTERY INSTALLATION

“Low Battery” will light in the display when

batteries are low (when using battery power).

1. Open the battery compartment door inside

the CD Compartment by pressing in on the

tab and then lifting it. To prevent the

possibility of losing the cover, it cannot be

removed.

2. Insert two (2) “AA” batteries (not included)

according to the polarity diagram inside the battery compartment.

Alkaline batteries are recommended for the longest playing time.

AC OPERATION

To operate the unit using AC power, connect an AC adapter (not

included) to an AC outlet having 120V, 60Hz AC only. Plug the small end

into the DC 4.5V jack on the rear of the unit and connect the other end

into the AC outlet. The batteries are automatically disconnected when the

AC adapter is used. DC4.5V z
CAUTION: When not using AC power, disconnect the AC adapter from

the wall outlet by pulling the plug (not the cord). Do not touch the AC

adapter with wet hands. Fully insert the plug without exposing any part of

the blade.

POWER SOURCES

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the

battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and

Carbon-zinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to

prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and

rupture. (Follow battery manufacturer’s directions.)

+

+ –

+

+

Advertising