Midland Radio MO-1008 - Manual (Page 19)

MO-1008 / 4008 / 1016 / 4016 User’s Guide
© 2004, Midland Radio Corporation 19
press and hold the programmed function button to assign the
current channel as the 1
st
or 2
nd
memory channel.
†
Unsquelched Monitor
Press and release this button to disable 2-tone, CTCSS, DCS
and noise squelch. Once activated, press any button to disable
unsquelched monitor mode.
†
Normal Monitor
Press and release this button to disable 2-tone, CTCSS and
DCS signaling. Once activated, press any button to disable
normal monitor mode.
†
Latched Normal Monitor
Press and release this button to disable 2-tone, CTCSS and
DCS signaling. Once activated, the latched normal monitor
remains active until this button is pressed again.
†
Panel Display
Press and release this button to turn off the LCD and
backlighting. Press again to turn the display back on.
†
Public Address
Press and release this button to activate public address mode.
Press again to return to normal radio operation.
†
Scan
Press and release this button to activate scan. Press again to
turn scan off.
†
Scan Skip
While scan is paused on a channel, press this button to
temporarily delete the pause channel from the scan list. While
scan is off, press this button to remove the selected channel
from the scan list or add it back if it was previously deleted. The
scan list will be reset to the dealer programming when the radio
is turned off.
†
Squelch Level