MITSUBISHI ELECTRIC LVP-X30U - Manual (Page 12)

E – 10
AUDIO MOUSE RGB / YCbCr VIDEO S-VIDEO
AUDIO MOUSE RGB / YCbCr VIDEO S-VIDEO
C o n n e c t i n g v i d e o e q u i p m e n t
You can connect up to two pieces of video equipment to the unit following the illustrations below.
• You can switch the input source (picture) to VIDEO or S-VIDEO when you connect two pieces of equipment.
(The S-VIDEO connection provides more vivid color and higher resolution compared to the VIDEO connection.)
• You can output the sound of only one component through the unit speaker even when two components are connected.
When connecting two external units, the audio from either one of these units can be output from the speaker of this device. Audio can be
turned on and off for video related input (video, S-video) from the menu or RGB (or YCbCr) input. (see page 28)
C o n n e c t i o n s
Connection to the VIDEO jack of the unit
Connection to the S-VIDEO jack of the unit
(L) (R)
VCR/DVD player/laser disc player, etc.
VCR/DVD player/laser disc player, etc.
Audio cable (accessory)
Audio adaptor (accessory)
Rear panel jacks of this
device
To video out jack
To audio out jack
Video cable (accessory)
White Red Yellow
(L) (R)
Audio cable (accessory)
Audio adaptor (accessory)
Rear panel jacks of this
device
To S-video out jack
To audio out jack
S-video cable (accessory)
White Red Yellow