Memorex SE - Manual (Page 3)

3. Follow the on-screen instructions for the installation (be sure to choose the 5-button Mouse selection).
4. After completing the installation, restart your computer.
After your computer has successfully rebooted, the software places a new symbol in the lower right corner
of your screen
Figure 1a Figure 1B
Double-clicking on this icon will open the BROWSER MOUSE SETTING configuration program for the Memorex
Optical ScrollPro Mouse SE. You can get to the same area by clicking on the "Setting" selection once you have
right-clicked on the icon. You will get the Windows Mouse Properties area if you click on the "Active Mouse
Properties" Selection.
You have two programming options: wheel and button.
Wheel (Figure 1a)
• Choose the Wheel Mode you prefer--
o The System default (Intelli-Mouse) mode setting is standard scrolling up and down with the scroll wheel.
o Enhanced scroll mode allows you to select different Wheel Speed settings shown below.
• Wheel Speed allows you to select the number of lines per scroll unit. Higher numbers mean faster
speeds. The second choice shown below will scroll even faster-pages instead of lines.
Button (Figure 1b)
• There are three buttons that can be programmed, button 3, 4, and 5.
• Clicking on one of the choices will display a number on the mouse image to identify the number with the
button it represents.
• Each button offers 57 choices of commands from which to choose. Select the ones you want to use from
the scroll down arrow.
The programmed mouse settings you choose will only take effect after clicking on APPLY and then OK.
Right-clicking on this icon will give you the following options: