Memorex MD6882 - Manual (Page 8)

7
RADIO OPERATION
Set the VOLUME control 1 to minimum
and plug the headphones into the
PHONES jack. Press the PLAY/PAUSE
(®p)/POWER ON button 2 to turn the
unit on.
2
1
1
TO LISTEN TO THE RADIO
Slide the FUNCTION switch 1 to the
RADIO position. Press the ESP/BAND
button
2 to select a band (AM or FM).
If listening to FM, press the MODE button
❸
to turn FM Stereo ON or OFF.
1
3 2
2
Press and release the Skip/Search/
Tuning
o 1 or n 2 button to tune a
station. Press and hold the Skip/Search/
Tuning
o 1 or n 2 button for Auto Scan
(see below).
2 1
3
Adjust the VOLUME control 1 and DBBS
switch 2 as desired. If FM STEREO
reception is weak/noisy, press the MODE
button
3 to turn off Stereo, in this case
the reception will be monaural.
2
3
1
4
To turn the radio off, press the STOP
(■)/POWER OFF button.
5 ANTENNAS
AM – This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM – The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
AUTO SCAN
Press and hold the Skip/Search/Tuning
o or
n button for approximately one second and
the unit will automatically search for the next
available station.