Power source – Memorex M12001 User Manual

Page 6

Advertising
background image

5

POWER SOURCE

AC CONNECTION

Insert the small end of the AC adapter into

the DC IN 15V jack (located on the rear of

the unit). Connect the other end to a wall

outlet having 120V AC, 60 Hz.

AC Adapter, DC 15V Z

NOTES:

Remove both the DC plug and the AC-

IN plug to disconnect the AC adapter

when not in use.

Only use the supplied AC adapter which has the following specs: DC 15V Z

To DC 5V IN Jack

Two (2) “AAA” size batteries can be used to

provide a backup for the clock and alarm time for

this unit as follows:

1. Open the battery door by pushing in on the

tab, then removing the door.

2. Insert two (2) “AAA” batteries as shown.

Alkaline batteries are recommended for the

longest playing time.

3. Place the battery door back on

the compartment.

NOTES:

• The batteries are used to back-up the clock and alarm times when the AC

adapter is disconnected or there is a power failure.

• The battery indicator will blink in the display when there are no batteries or the

batteries are low and need replacing.

IMPORTANT! See BATTERY PRECAUTIONS on the next page.

BATTERY INSTALLATION

Advertising