Child restraint – Mazda 2007 CX-7 User Manual

Page 55

Advertising
background image

Black plate (55,1)

2. Expand the open seams on the rear of

the seat bottom slightly to verify the
locations of the LATCH lower anchors.

NOTE

The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.

3. Secure the child-restraint system using

BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instructions.

4. If your child-restraint system came

equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety. First,
remove the anchor bracket cover on the
rear end trim.

5. Flip over the trunk board.

Trunk board

Essential Safety Equipment

Child Restraint

2-43

CX-7_8V28-EA-06B_Edition2 Page55
Monday, March 13 2006 5:5 PM

Form No.8V28-EA-06B

Advertising